Home/Diffusion Pumps/Page 6

Vacuum Furnace End-User Q&A Community Latest Questions

Answer it Forward Challenge
  • 0
Answer it Forward Challenge
Asked: July 24, 2020In:
  • 0

cleaningcooling lines
  1. Kevin Tracy

    Disconnect the lines and add additional temporary plumbing to flush the system with a pump and 2 buckets. Use a solution of CLR and water in one bucket and flush through the lines to the other bucket. Preferably, flush backwards through the system to break things up first, then flush through in theRead more

    Disconnect the lines and add additional temporary plumbing to flush the system with a pump and 2 buckets. Use a solution of CLR and water in one bucket and flush through the lines to the other bucket. Preferably, flush backwards through the system to break things up first, then flush through in the normal direction. Flush with plain water before reconnecting the system. If this does not work, repeat the process with a solution of muriatic acid.

    See manufacturer recommendation for chemical mixtures and MSDS for safety.

    See less
    • 2
Answer it Forward Challenge
  • 1
Answer it Forward Challenge
Asked: July 24, 2020In:
  • 1

gas leaksjet assemblyperformance
  1. Greg Kimble

    If the jet assembly (array) is not properly assembled (or seated) it would allow larger gaps or openings for the flow of oil vapor than designed for.  This would affect the performance.  A water leak in a cold cap or trap would hinder performance.  Both of these issues would cause the pressure to beRead more

    If the jet assembly (array) is not properly assembled (or seated) it would allow larger gaps or openings for the flow of oil vapor than designed for.  This would affect the performance.  A water leak in a cold cap or trap would hinder performance.  Both of these issues would cause the pressure to be higher than expected.

    See less
    • 0
Load More Questions